CHANGING THE COLOURS

Press and hold the function button for 2 seconds, until imix flashes orange twice.

You can now choose your own colour or range of colours. imix will cycle slowly through all colours.

To select a custom range of colours, press the function button to choose the starting colour of the range. Press the function button again to choose the end colour of the range. imix will flash green twice to confirm your colour choice. Pressing the function button twice in quick succession will choose a single colour. Again, imix will flash green twice to confirm colour choice. To turn imix off, click the function button once. 

 

TURNING THE LIGHTS OFF

Whilst you're in the process of changing the colours, simply hold the function button down for more than 2 seconds to switch the lights off completely.


SETTING THE TIMER

imix default mixing time is 5 minutes. If you would like to change the timing to add less or more mixing minutes, you will need to do a reset.

To reset the imix to the default settings for the colours and to change the timer, you will need to firstly unplug the USB cable, then press and hold the function button. Whilst pressing and holding the function button, plug the USB cable back in.

imix will flash orange, then green and finally blue. When it flashes blue, click the amount of minute times you want… for example, click 3 times and the imix will set mixing for 3 minutes. If you click 6 times, imix will set mixing for 6 minutes. Remember default is 5 minutes and we believe this works well.

 

RESET TO FACTORY DEFAULTS

To reset the imix to the default settings for the colours and timer, you will need to firstly unplug the USB cable, then press and hold the function button. Whilst pressing and holding the function button, plug the USB cable back in.

imix will flash orange, then green and finally blue.

Release the function button. imix is reset and ready to use.

Availability